KT 48V 15A control unit - with and without Hall Effect - UPG connection

KT Control unit 48V 15A - 250 / 350W - with and without hall sensors - UPG

- This universal control unit works at 48v and also has the particularity of being able to work both with motors with hall sensors (the 5/6 small wires coming out of the motor) and with motors without hall sensors.

- This controller ONLY INTERFACE with KT displays and components.

- This universal control unit works with all brushless motors (without brushes) but hardly interfaces with the standard bike displays.

- We also recommend purchasing our universal display to make sure the controller works properly

- It can be mounted on: E-Bikes, electric scooters, electric scooters, electric quads, scooters for the disabled. So on every electric vehicle that has a brushless motor (you can guess if the motor is brushless from the exit of three yellow, green and blue wires from the motor or from a single cable that starts from the motor with 9 PIN)

Measures:
LENGTH: 8.5cm
TOTAL LENGTH: 9.5cm
WIDTH: 5cm
HEIGHT: 3cm

Technical data:
MODEL: KT48ZWSRT-PXS24L
RATED VOLTAGE: DC48V
RATED CURRENT: 7A
MAXIMUM CURRENT: 15+-1A
LOW VOLTAGE PROTECTION: DC40+ - 0.5V
SPEED SET: 1-4.2V

For any technical information on assembly and compatibility, the technicians are available at 3206140014 also with whatsapp message. Capobranco Project is not responsible for tampering or incorrect installations. The CAPOBRANCO branded control units use the best components to provide the best quality and reliability. Our control units, assembled by specialized technicians, are tested at the end of the production process and before shipment. On the control units for electric bikes, scooters and electric scooters, Capobranco Project guarantees a 1 year warranty. Our products are stored and shipped from our headquarters in Italy.