KT Control unit 36 / 48V 25A - 500/750W - with and without hall sensors - UPG

Control unit 36 / 48V 25A - 500/750W - with and without hall sensors - UPG

- This universal control unit has the capacity to operate at two different voltages in fact, it can work both at 36v and at 48v and also has the particularity of being able to operate both with motors with hall sensors (the 5/6 small wires coming out of the engine) than with engines that do not have hall sensors.

- This controller ONLY INTERFACE with KT displays and components.

- This universal control unit works with all brushless motors (without

brushes) but hardly interfaces with standard bike displays.
- Can be mounted on: E-Bike, electric scooters, electric scooters, quads

electric, scooter for the disabled. So on every electric vehicle that has a

brushless motor (you can guess if the motor is brushless from the outflow of three

wires of yellow, green and blue color from the engine).
- We also recommend purchasing our universal display to be sure of the

correct operation of the controller.

Measurements:
LENGTH: 12.5 cm
TOTAL LENGTH: 13.5 cm
WIDTH: 6.5 cm
HEIGHT: 4 cm

Technical data:
MODEL: KT36 / 48ZWSRMTD-PXS19
NOMINAL VOLTAGE: DC36V / 48V
NOMINAL CURRENT: 12A
MAXIMUM CURRENT: 25A
LOW VOLTAGE PROTECTION: DC30 / 40 + - 0.5V
SPEED SET: 1-4.2V

For any technical information on assembly and compatibility, the technicians are available to the number 3206140014 also with whatsapp message. Capobranco Project is not responsible for tampering or incorrect installations. The control units branded CAPOBRANCO use the best components to provide the best quality and reliability Our control units, assembled by specialized technicians, are tested at the end of the process production and before shipment. On the control units for electric bikes, scooters and electric scooters, the Capobranco Project guarantees 1 year warranty Our products are stocked and shipped from our headquarters in Italy.