LCD display for ENGWE EP-2 PRO - ENGINE

LCD Display for ENGWE EP-2 PRO - ENGINE X
IMPORTANT: CHECK THE CODE ON THE BACK OF THE DISPLAY, THE CODE MUST END WITH XS25

FUNCTION:
Real-time speed, maximum speed, average speed
Real-time motor power
Battery indicator
Assistant level
Odometer, trip
Indicator light
Metric (km/h)/imperial (mph) switching
Error code indicator
Automatic headlight, brightness adjustment, automatic backlight
Automatic shutdown

IMPORTANT:
Be sure to power on before connecting and disconnecting the cable, otherwise the display will be completely damaged;
When attaching the display to the ebike, make sure the torque of the screwdriver is about 0.5Nm (DO NOT EXCEED 0.6Nm), otherwise it will damage the handle;
Do not put the display into water;
The display can be cleaned with a soft damp cloth, but DO NOT use liquids or chemical sprays on the display;
Damage and failure of the instrument caused by improper installation or use are not covered by the after-sales warranty.

For any technical information on compatibility, technicians are available at 3206140014 also with a WhatsApp message. Capobranco Project is not responsible for tampering or incorrect installations. The displays use the best components to provide the best quality and reliability. The displays are tested before shipping. Capobranco Project guarantees a 1-year warranty on all displays. Our products are stored and shipped from our headquarters in Italy.